Access Profiles

This node displays the device's profile for each access account. Access accounts are used by RICOH CloudStream Device Management to communicate to devices via DM Agent.

The Access Profile node displays the profiles used by the DM Agent as read-only. You cannot manually change the profile for each access account.

Here is the list of access accounts:

Device Administrator - To create a profile for this account, go to Device Administrator Access Profile.
SNMP - Uses SNMPv1/2 and SNMP v3. To create a profile for this account, go to SNMP Access Profile.
SDK/J Platform - To create a profile for this account, go to SDK/J Platform Access Profile.

The Device Management (DM) Agent installed on the MFP identifies the correct profile created in Access Profiles in the Device Configuration section. The DM Agent uses the profile to perform polling, configurations, and other operations.

In case the access account value is modified, the DM Agent will look for another profile that matches the device settings and update the Profiles in the Access Profile node. If there is no profile that matches the device's settings, then the device becomes disconnected.