DM Agent Proxy Settings

If you do not want to use a proxy server, set the Proxy method to No proxy, then click [Continue]. Skip the steps below and proceed to DM Agent Network Range List.

 

To use the DM Agent Proxy settings when adding the device to CloudStream DM, disable the device’s Proxy settings via WIM or the device panel. This will allow the device to connect to the CloudStream DM using the proxy server settings you configured in the DM Agent Tool instead of the device’s proxy settings.

  1. If you want to use proxy, select either from the two:

    • Proxy with basic authentication

    • Proxy with Kerberos authentication - If this is selected, the following fields are required:

      • KDC

      • Realm

        Service Principal Name

  2. Enter the Server Address, either hostname or IP address.

  3. Enter the Server Port Number.

    Specify the port number of the Proxy server. Paired with the Server Address, the values will be used to connect to the Proxy server.

  4. Enter the Proxy User Name and Password.

    Use the User Principal Name (UPN) if using Basic Proxy authentication and Kerberos, and down-level logon name format for NTLM proxy authentication.